We use cookies and other tools to enhance your experience on our website and to analyze our web traffic.
For more information about these cookies and the data collected, please refer to our Privacy Policy.

New CPAP user having trouble falling asleep

4 posts
Was this reply useful? Learn more...
   
[-]
tronchaser +0 points · over 1 year ago Original Poster

Hello, i know this has been covered, but other circumstances are slightly different...
I am a new user of CPAP and I have the Resmed 10 unit. I am using the pillow, the settings are on 5-20 and have no issues with air leaking. The first night i tried had a very long ramp time of 10 minutes and i found myself air starved and would take extremely long breaths to make up for it. Exhaling took too long as well and after about 4 breaths i felt suffocated and would open my mouth and take a huge breath to catch up. the 2nd night i set the ramp to 5 minutes and after about 5 minutes i felt like i was getting enough air, but couldn't fall asleep due to sounding like darth vader... The 3rd night i set the ramp to 0 and felt like i was getting enough air but darth vader was laying next to me and wouldn't let me sleep...

I did notice that i seem to take longer breaths when on CPAP than i do when not. I am a shallow breather, quick in, quick out, but it seems that when on CPAP i can't get the same pattern to work. I am a very light sleeper as it is and that is making it hard to fall asleep. One of the nights i went to bed i was totally exhausted and still couldn't fall asleep with the CPAP, i end up pulling it off and falling asleep without it.

Is it just a matter of training yourself to fall asleep while listening to Darth Vader? My wife is a deep sleeper (learned to sleep through most of my snorning) and it doesn't seem to bother her.. My sleep study revealed that i had 8 events over an 8 hour period, they told me it was mild sleep apnea. I am at a loss as to what to do to make this work, everyone i have talked with that has used a CPAP machine has said that their quality of sleep is much better while using it, I would like to find out if I will benefit from it as well...

Please help this unsleepable soul!

3,156 posts
bio
Was this reply useful? Learn more...
   
[-]
Sierra +0 points · over 1 year ago Sleep Patron

This is a common problem. From what I can see, you could benefit from some comfort setup changes. Depending on how your machine has been set up, you may be able to do this from the user menu, or if not you will have to go into the Clinical Menu. To do that you hold the rectangular home button and the round set button down at the same time for 5 seconds. I would move your minimum pressure up to 7 cm. And instead of choosing a ramp time, choose Auto. In auto mode it actually holds a fixed pressure until you fall asleep. You also need to set the Start Ramp pressure to 7 cm. These changes will give you a fixed 7 cm of pressure instead of 4 (default) until you fall asleep. After that it will switch to control the pressure based on the number of events you are having.

If a start pressure of 7 cm and minimum of 7 cm is not enough to feel like you can breath easily, then you could try 8 cm. Hope that helps some. Any questions, just ask.

4 posts
Was this reply useful? Learn more...
   
[-]
tronchaser +0 points · over 1 year ago Original Poster

Thanks for the response, I can give that a try, but not sure if it will help, the pressure is already set to auto and within 2 or 3 minutes it is as high as 16, my brother in law has one of these and he told me that if it goes that high, i really need the CPAP... it is going that high while i am still awake and seems that it might be due to my pattern of breathing? Not sure... But i will try your suggestion...

Thanks again!

3,156 posts
bio
Was this reply useful? Learn more...
   
[-]
Sierra +0 points · over 1 year ago Sleep Patron

One of the things you can do to get more detail on what is going on is to download OSCAR which allows you to see in minute by minute detail what is happening with events and pressure. It requires a PC or Mac and a SD card reader. The first thing you need to figure out is if you really need all that high of a pressure. You said you had 8 events over an 8 hour period. That is an AHI of 1, and is considered very normal - essentially no apnea. Over 5 per hour is considered mild apnea, while over 15 is moderate, and over 30 is severe.

This is an example of a screenshot. Notice how the pressure (red line) stays at a constant 9 cm and then when the machine decides you are asleep it ramps the pressure up. You can see during the night how the pressure responds to flow limitations and events.

4 posts
Was this reply useful? Learn more...
   
[-]
tronchaser +0 points · over 1 year ago Original Poster

Yes, i have installed Oscar and have looked at the data, but not understanding some of them doesn't help, i am learning and hope to be able to decipher all of the data as some point..

3,156 posts
bio
Was this reply useful? Learn more...
   
[-]
Sierra +0 points · over 1 year ago Sleep Patron

If you want comments on your OSCAR daily screen, just post it here. On a PC, F12 saves it. Take note in the lower right part of the screen, where it is. Then with file explorer find it and drag it into an open post. Use the orange Write a Reply screen so you get a full width post size.

What you should be looking for for the events which are causing your air pressure to go up. Also important is the type of events you are having, such as obstructive (OA) or central (CA). In general obstructive events can be reduced with more pressure. But, central events can be made worse with more pressure.

11 posts
bio
Was this reply useful? Learn more...
   
[-]
raysmith45 +0 points · over 1 year ago

Re: Darth Vader. Try coating the ports of the water tank with a thin coat of Vaseline, it cut down the noise on my machine. No ramp time and a setting of CPAP 6.4mm works well for me as does a wedge under my pillow to raise my head. Good luck.

4 posts
Was this reply useful? Learn more...
   
[-]
tronchaser +0 points · over 1 year ago Original Poster

The noise is coming from the air going through the pillow into my nose, and when i exhale, how would coating the tank with vasoline stop that? I did make the ramp time 0, that helps, but haven't tried a thicker pillow under my head... I think i realized that i am a mouth breather, is it possible to train yourself to breath through the nose when you have been breathing through the mouth for so many years?

3,156 posts
bio
Was this reply useful? Learn more...
   
[-]
Sierra +0 points · over 1 year ago Sleep Patron

The only issue I have had with the A10 water reservoir making noise is if you do not push it firmly into the machine. If it is not firmly in, then it will kind of click on each breath. Probably the silicone seals flapping back and forth.

What type of mask are you using? The most common ResMed AirFit P10 mask is very quiet. Opening your mouth with a nasal mask is a problem however and the air rushing out will be noisy. Air will go in your nose and back out your mouth. That will cause large leaks that tend to have flat tops on the OSCAR leak rate graph. It reduces the effectiveness of the machine and you can also wake up with a very dry mouth. I am also a mouth breather, and tried various things to solve the issue. A chin strap kind of works, but it also makes the whole setup more uncomfortable. My final solution has been to tape my mouth closed with 3M micropore tape. You can get it at Walmart. This works for me, but it is not for everyone. The only other solution is a mask that covers your nose and mouth. I tried a ResMed AirFit F20 and simply could not stop it from leaking and waking me up. So I now use the P10 with mouth taping.

Setting the ramp time at 0 and increasing minimum pressure can work for some, but I prefer to use the Auto ramp feature. That way you can control the start pressure independently. Where do you set your EPR? When you use the Ramp you can set the EPR to be full time or for Ramp Only. Some find that using the EPR to improve comfort during the going to sleep phase, but having it turn off after that gives the best results. For others EPR full time works best. You can only try each way and see what works for you.

I would suggest kind of breaking your attempts to improve your setup into two parts. First try to get better comfort while going to sleep, and then find out if there are any ways to reduce the pressure the machine is using to treat you after that. One way is to simply limit maximum pressure. Another way is to switch the machine to fixed pressure CPAP mode. My wife's machine is setup to limit maximum pressure, while I have switched mine to fixed pressure mode. I have issues with CA events and using a fixed pressure seems best in controlling OA's while limiting pressure enough to not cause CA events.

It would be best to post your typical Daily screenshot from OSCAR and I could provide better comments.

3,156 posts
bio
Was this reply useful? Learn more...
   
[-]
Sierra +0 points · over 1 year ago Sleep Patron

To perhaps give you a bit of encouragement on how things may seem bad now, there is hope with some perseverance to get things sorted out. Here are a couple of my Daily reports. The first is from my first week on the ResMed AirSense 10 AutoSet from 4 years ago. It was in Auto mode with a minimum pressure of 10.5 and maximum of 16 cm or so. The second one is from last night, with the same machine, but with the setting that have evolved over the past 4 years. It is now in fixed pressure CPAP mode, with a set pressure of 11 cm. This is not likely the solution for everyone, but it has worked for me. It does show that while the Auto mode may work for some, it is not a cure all. My wife still has hers set in Auto mode, and that works well for her. In general in Auto mode most end up with a fairly narrow band between minimum pressure and maximum pressure. Set this way, it behave more like a fixed pressure CPAP mode

Please be advised that these posts may contain sensitive material or unsolicited medical advice. MyApnea does not endorse the content of these posts. The information provided on this site is not intended nor recommended as a substitute for advice from a health care professional who has evaluated you.