which one is the ResMed AirSense S10?

I am wondering if this ResMed AirSense S10 ordered by my sleep medicine doctor is different from the one, ResMed AirSense 10 autoset? Are they the same? I want the autoset!!!!

https://imgur.com/IEEJPfd

The previous generation model of the ResMed was called the S9. The latest model I believe is officially called the AirSense 10 AutoSet, or sometimes A10 for short. I believe some now call the new model the S10, but it is more correctly the A10. In any case your doctor clarified the type of the ResMed as an APAP. See the highlighted area. Insist on a AirSense 10 AutoSet. Make sure the machine has a SD card in it so you can track your results with SleepyHead.

Slight correction Sierra, AirSense 10 is a series that includes everything from a CPAP "brick" to the AutoSet for Her.

with the OP's Rx saying ResMed AirSense 10 followed by APAP should be no problem in getting the AutoSet. David I would suggest that you contact the DME and verify that you are getting a ResMed Autoset or preferably the AutoSet for Her with the additional algorithm that you may or may not use.

The way the Rx is worded is somewhat confusing there is an Air*Curve* 10 S which is a manual bi-level which you do not want You would want the AirCurve 10 VAuto vs the "S" in that case.

I have a Resmed AirSense 10 S BIPAP since Jan 31 as a result of my OP's original Rx. I'm now battling DME, sleep coordinator (go-between) and Cigna to get an AUTO upgrade device. OP has revised the Rx to AUTO BIPAP but DME says there's no code for AUTO BIPAP to send to Cigna. Cigna says get "authorization" from Dr. YIKES!!! To Be continued...

Jeff there is no such thing as a "Resmed AirSense 10 S BIPAP" There is a Resmed AirCurve 10 S and it is not a BiPap, though PR's registered Trademark is often used as a substitute for the correct term Bi-Level. I mention this to avoid confusion with the OP. The machine you want is "Resmed AirCurve 10 VAuto" I believe the code you are looking for is E0562

Tried various key strokes and dragging image to copy SH Stat report, but didn't work. Using friend's Mac and not sure how to do it. HELP some Mac attacker! Please enlighten me.

CPAP Statistics 32 days of CPAP Data, between Thu Jan 31 2019 and Sun Mar 3 2019 Details Most Recent Last Week Last 30 Days Last 6 Months Last Year CPAP Usage Average Hours per Night 05:18 06:06 06:18 06:16 06:16 Compliance 100% 100% 97% 97% 97% Therapy Efficacy

AHI 1.51 3.52 3.20 3.38 3.38 Obstructive Index 0.57 0.88 0.89 0.91 0.91 Hypopnea Index 0.57 0.47 0.43 0.49 0.49 Clear Airway Index 0.19 1.45 1.45 1.44 1.44 Leak Statistics Average Leak Rate 28.41 18.85 14.96 16.88 16.88 90% Leak Rate 55.20 0.00 0.00 0.00 0.00 % of time above Leak Rate threshold 62.59% 24.42% 19.86% 21.97% 21.97% Pressure Statistics Average EPAP 11.76 11.54 11.36 11.35 11.35 Min EPAP 4.28 4.26 4.24 4.24 4.24 Max EPAP 12.00 12.00 12.00 12.00 12.00 Average IPAP 15.76 15.54 15.36 15.35 15.35 90% IPAP 16.00 0.00 0.00 0.00 0.00 Min IPAP 8.28 8.26 8.24 8.24 8.24 Max IPAP 16.00 16.00 16.00 16.00 16.00

Changes to Prescription Settings First Last Days AHI FL Machine Pressure Relief Mode Pressure Settings Thu Jan 31 2019 Sun Mar 3 2019 32 3.37 0.00 S (37046) None VPAP-S EPAP 12.0 IPAP 16.0 (cmH2O)

Machine Information Brand Series Model Serial First Use Last Use ResMed AirCurve 10 S (37046) 22171493290 1/31/19 3/3/19 This report was generated by SleepyHead (1.0.0-beta-2), and has not been approved in any way for compliance or medical diagnostic purposes.

AGAIN: I tried to send SH image (like y'all do) using MAC but my Windows PC knowledge/guesswork only got me the above. Is there a MAC attacker hack that can give me keystrokes for SH image transfer? (Note SH version I'm using)

How do I get to "image file" on a MAC? I'm a PC guy, so I'm flying almost blind on this darn MAC.

Full Screen Capture: Shift – Command – 3.

Part Screen Capture: Shift – Command – 4.